BIR033 stainless steel bird post 125mm

Stainless steel threaded rods as part of the bird deterrent wire system to tension wires at the correct height.
Lengths depend on the application, with a choice of an anchor plug or a plastic base.

Use a 125mm threaded rod in combination with the plastic base to install the wire at approximately 130mm height.

Bird deterrent system explanation:
The bird deterrent wire system is a flexible system that, with proper application, can yield excellent results in deterring pigeons on, for example, edges and ledges. The materials are mainly made of stainless steel.
 
The thin nylon-coated stainless steel wire must be tensioned between threaded rods using wire clamps. The threaded rods must be placed at a maximum distance of 150cm. The wire is tensioned with a micro spring on every second rod, so tension a maximum of 3 meters per spring. The rods can be fastened by drilling (use 25mm anchor plug) or screwing/gluing (use plastic base). Where one ends at a vertical wall, an anchor plug (25mm) with a split pin (25mm) can be mounted in the vertical wall to finish the wire.

Threaded rods are used to keep the stainless steel bird deterrent wire at the correct height above the edge or ledge.
For effective pigeon deterrence, it is recommended to apply at least two rows. The front row, at approximately 20mm distance from the edge, should have a wire height of approximately 100mm. The second and subsequent rows should have a wire height of approximately 130mm. Due to the two height differences and the two different mounting methods (drilling with anchor plug, or mounting with plastic base), the threaded rods are available in 4 different lengths.

Stainless steel bird deterrent wire must be secured using loops.
Wire clamps are used to create loops.
With the special crimping tool, the wire clamps can be fixed onto the wire.