BIR040 bird wire micro spring stainless steel (bag 100 pcs)

Stainless steel springs to tension wire of the bird deterrent wire system.

Compose the material list yourself using the explanation below or download the instructions.

Bird deterrent system explanation:
The bird deterrent wire system is a flexible system that, when applied correctly, can lead to excellent results for deterring pigeons on, among other things, edges and ledges. The materials are mainly stainless steel.
 
The thin nylon-coated stainless steel wire must be tensioned between wire rods using wire clamps. The wire rods should be placed at a maximum distance of 150cm. The wire is tensioned with a micro spring on every second rod, so it should be tensioned a maximum of 3 meters per spring. The rods can be attached by drilling (use anchor plug 25mm) or screwing/gluing (use plastic base). Where you end at a vertical wall, an anchor plug (25mm) with a split pin (25mm) can be mounted in the vertical wall for finishing the wire.

Wire rods are used to hold the stainless steel bird deterrent wire at the correct height above the edge or ledge.
For effective pigeon deterrence, it is recommended to use at least two rows. The front row, about 20mm from the edge, should have a wire height of about 100mm. The second and subsequent rows should have a wire height of about 130mm. Due to the two height differences and the two different mounting methods (drilling with anchor plug, or mounting with plastic base), the wire rods are available in 4 different lengths.

Stainless steel bird deterrent wire should be attached with loops.
Wire clamps are used to create loops.
With the special crimping tool, the wire clamps can be fixed on the wire.