BIR010 anchor rivet grey 25mm (bag 100 pcs)

Plugs of 25 mm for drilling into stony substrates. Suitable for placing threaded rods of 120mm or 150mm or for inserting split pins. Part of the bird deterrent wire system.

Compile your own material list using the explanation below or download the instructions.

Bird deterrent system explanation:
The bird deterrent wire system is a flexible system that, when applied correctly, can lead to excellent results for deterring pigeons on, for example, ledges and ridges. The materials are mainly made of stainless steel.
 
The thin nylon-coated stainless steel wire must be tensioned between threaded rods using wire clips. The threaded rods should be placed at a maximum distance of 150cm. The wire is tensioned with a micro spring at every second rod, so tension a maximum of 3 meters per spring. The rods can be mounted by drilling (use 25mm anchor plug) or screwing/gluing (use plastic base). Where you end at a vertical wall, an anchor plug (25mm) with a split pin (25mm) can be mounted in the vertical wall for finishing the wire.

Threaded rods are used to keep the stainless steel bird deterrent wire at the correct height above the ledge or ridge.
For effective pigeon deterrence, it is recommended to apply at least two rows. The front row, at approximately 20mm distance from the edge, should have a wire height of about 100mm. The second and subsequent rows should have a wire height of about 130mm. Due to the two height differences and the two different mounting methods (drilling with anchor plug or surface mounting with plastic base), the threaded rods are available in 4 different lengths.

Stainless steel bird deterrent wire should be attached using loops.
Wire clips are used to create loops.
With the special crimping tool, the wire clips can be fixed onto the wire.