BIR024 stainless steel bird post 95mm

Stainless steel threaded rods as part of the bird deterrent wire system to tension wires at the correct height.
Lengths depend on the application, optionally with an anchor plug or a plastic base.

Use a 95mm threaded rod in combination with the plastic base to install the first wire on the edge at approximately 100mm height.

Bird deterrent system explanation:
The bird deterrent wire system is a flexible system that, with proper application, can lead to excellent results for deterring pigeons on, among other things, edges and ledges. The materials are mainly stainless steel.
 
The thin nylon-coated stainless steel wire must be tensioned between threaded rods using wire clamps. The threaded rods should be placed no more than 150cm apart. The wire is tensioned with a micro spring on every second rod, so tension a maximum of 3 meters per spring. The rods can be fixed by drilling (use anchor plug 25mm) or screwing/gluing (use plastic base). Where one ends at a vertical wall, an anchor plug (25mm) with a split pin (25mm) can be mounted in the vertical wall for finishing the wire.

Threaded rods are used to keep the stainless steel bird deterrent wire at the correct height above the edge or ledge.
For effective pigeon deterrence, it is recommended to apply at least two rows. The front row, approximately 20mm from the edge, should have a wire height of about 100mm. The second and subsequent rows should have a wire height of about 130mm. Due to the two height differences and the two different mounting methods (drilling with anchor plug, or mounting with plastic base), the threaded rods are available in 4 different lengths.

Stainless steel bird deterrent wire must be fixed with loops.
Wire clamps are used to create loops.
With the special crimping tool, the wire clamps can be fixed on the wire.