BIR001 coated stainless steel wire, reel 100 meter

Roll of stainless steel wire with coating as part of the bird deterrent wire system.
Create your own materials list using the explanation below or download the instructions.

Bird deterrent system explanation:
The bird deterrent wire system is a flexible system that, when applied correctly, can lead to excellent results for deterring pigeons on edges and ledges, among other things. The materials are mainly made of stainless steel.
 
The thin nylon-coated stainless steel wire must be stretched between wire rods using wire clips. The wire rods should be placed at a maximum distance of 150cm. The wire is tensioned with a micro spring at every second rod, so a maximum of 3 meters per spring. The rods can be attached by drilling (use anchor plug 25mm) or screwing/gluing (use plastic base). Where one ends at a vertical wall, an anchor plug (25mm) with a cotter pin (25mm) can be installed in the vertical wall to finish off the wire.

Wire rods are used to keep the stainless steel bird deterrent wire at the correct height above the edge or ledge.
For effective pigeon deterrence, it is recommended to apply at least two rows. The front row, approximately 20mm from the edge, should have a wire height of about 100mm. The second and subsequent rows should have a wire height of about 130mm. Due to the two height differences and the two different mounting methods (drilling with anchor plug, or surface mounting with plastic base), the wire rods are available in 4 different lengths.

Stainless steel bird deterrent wire must be attached using loops.
Wire clips are used to make loops.
With the special crimping tool, the wire clips can be fixed onto the wire.