BIR012 bird wire crimps (bag 100 pcs)

Stainless steel wire clamps to secure wire from the bird deterrent wire system. Optionally use the crimping tool for this.

Compile the material list yourself using the explanation below or download the instructions.

Bird Deterrent System Explanation:
The bird deterrent wire system is a flexible system that, with proper application, can lead to excellent results for deterring pigeons on, among other things, edges and ledges. The materials are mainly made of stainless steel.
 
The thin nylon-coated stainless steel wire must be tensioned between wire rods using wire clamps. The rods must be placed at a maximum distance of 150cm. The wire is tensioned with a micro spring at every second rod, so tension a maximum of 3 meters per spring. The rods can be attached by drilling (use anchor plug 25mm) or screwing/gluing (use plastic base). Where you end up at a vertical wall, an anchor plug (25mm) with a split pin (25mm) can be mounted in the vertical wall for finishing the wire.

Wire rods are used to keep the stainless steel bird deterrent wire at the correct height above the edge or ledge.
For effective pigeon deterrence, it is recommended to apply at least two rows. The front row, approximately 20mm from the edge, should have a wire height of approximately 100mm. The second and subsequent rows should have a wire height of approximately 130mm. Due to the two height differences and the two different mounting methods (drilling with anchor plug, or mounting with plastic base), the wire rods are available in 4 different lengths.

Stainless steel bird deterrent wire must be attached using loops.
Wire clamps are used to create loops.
With the special crimping tool, the wire clamps can be fixed on the wire.