BIR013 split pin 25mm (bag 100 pcs)

Stainless steel split pin to finish wire ending at a vertical wall, the pin can be placed in the 25mm anchor plug. Part of the bird deterrent wire system

Compose the material list yourself using the explanation below or download the instructions.

Bird deterrent system explanation:
The bird deterrent wire system is a flexible system that can lead to excellent results when applied correctly for keeping pigeons off edges and ledges. The materials are mainly made of stainless steel.
 
The thin nylon-coated stainless steel wire must be tensioned between wire rods using wire clamps. The wire rods must be placed at a maximum distance of 150cm. The wire is tensioned with a micro spring at every second rod, so tension a maximum of 3 meters per spring. The rods can be mounted using drilling (use anchor plug 25mm) or screwing/gluing (use plastic base). Where ending at a vertical wall, an anchor plug (25mm) with a split pin (25mm) can be mounted in the vertical wall for finishing the wire.

Wire rods are used to keep the stainless steel bird deterrent wire at the correct height above the edge or ledge.
For effective pigeon deterrence, it is recommended to apply at least two rows. The front row, at about 20mm from the edge, should have a wire height of about 100mm. The second and subsequent rows should have a wire height of about 130mm. Due to the two height differences and the two different mounting methods (drilling combined with anchor plug, or mounting combined with plastic base), the wire rods are available in 4 different lengths.

Stainless steel bird deterrent wire must be attached using loops.
Wire clamps are used to make loops.
With the special crimping tool, the wire clamps can be fixed to the wire.