BIR026 beam clamp and post 95x4mm

Special variants of stainless steel threaded rods as part of the bird deterrent wire system to tension wires at the correct height.
Choice of beam clamp, gutter clamp, or ridge bracket.

Threaded rod of 95mm welded onto a clamp that can be clamped onto a steel beam. Entirely made in stainless steel.

Compose the material list yourself using the explanation below or download the instructions.

Bird deterring system explanation:
The bird deterrent wire system is a flexible system that can lead to excellent results when used correctly for deterring pigeons on edges and ledges. The materials are mainly made of stainless steel.
 
The thin nylon-coated stainless steel wire must be tensioned between wire rods using wire clamps. The wire rods should be placed at a maximum distance of 150cm. The wire is tensioned with a micro spring on every second rod, so a maximum of 3 meters per spring tension. The rods can be mounted by drilling (using anchor plug 25mm) or screwing/gluing (using plastic base). Where ending at a vertical wall, an anchor plug (25mm) with a split pin (25mm) can be mounted in the vertical wall for finishing the wire.

Wire rods are used to keep the stainless steel bird deterrent wire at the right height above edge or ledge.
For effective pigeon deterrent, it is advisable to apply at least two rows. The front row, at about 20mm distance from the edge, should have a wire height of about 100mm. The second and subsequent rows should have a wire height of about 130mm. Due to the two height differences and two different mounting methods (drilling combined with anchor plug, or build up combined with plastic base), the wire rods are available in 4 different lengths.

Stainless steel bird deterrent wire must be attached using loops.
Wire clamps are used to make loops.
With the special crimping tool, the wire clamps can be fixed onto the wire.