BIR019 gutter post 95x4mm

Special variants of stainless steel threaded rods as part of the bird deterrent wire system to tension wires at the correct height.
Choose from beam clamp, gutter clamp or ridge mount.

Threaded rod of 95mm welded to a clamp that can be attached to a gutter. Entirely made of stainless steel.

Compose your own material list using the explanation below or download the instructions.

Bird deterrent system explanation:
The bird deterrent wire system is a flexible system that, when applied correctly, can lead to excellent results for keeping pigeons away from edges and ledges. The materials are primarily made of stainless steel.
 
The thin nylon-coated stainless steel wire must be tensioned between threaded rods using wire clips. The threaded rods should be placed at a maximum distance of 150cm. The wire is tensioned with a micro spring on every second rod, so tension up to 3 meters per spring. The rods can be attached by drilling (use anchor plug 25mm) or screwing/gluing (use plastic base). Where one ends at a vertical wall, an anchor plug (25mm) with a cotter pin (25mm) can be mounted in the vertical wall to finish off the wire.

Threaded rods are used to keep the stainless steel bird deterrent wire at the correct height above an edge or ledge.
For effective pigeon deterrence, it is recommended to apply at least two rows. The front row, about 20mm from the edge, should have a wire height of about 100mm. The second and subsequent rows should have a wire height of about 130mm. Due to the two height differences and the two different mounting methods (drilling combined with anchor plug, or mounting combined with plastic base), the threaded rods are available in 4 different lengths.

Stainless steel bird deterrent wire must be secured with loops.
Wire clips are used to create loops.
The special crimping tool can be used to fix the wire clips onto the wire.